How to register ET Surface

A. Single use (fixed) license

The registration process involves three steps:

1. Follow the links from http://www.ian-ko.com  and purchase a license of ET Surface. You will receive a reference number for your order.
2. On the ET Surface Main Dialog go to Help ==>  Request License Key button. Fill the small form - all the fields are required.
   • User Name
   • Company
   • Reference number ( see Step 1)

   After filling the form there are two options to chose from:

   • Create Key Request File will write all the information to a file (*.et3). Send this file to register@ian-ko.com and in maximum 24 hours you will receive a license key that will unlock the full version.
   • Send Key Request via e-mail. This option will open you default e-mail program with all necessary information. You just have to click the SEND button.

   Important note:

   Do not change anything in the request file or the body of the generated message. It will cause the registration process to fail.

3. When you receive the Key File , save the attachment (*.ets file) to you hard disk. Click on Register button (Main Dialog). In the form click on Load Key File button. Select the received file. The ET Surface dialog will close. When opened next time the program will be registered.

Important notes:

Do not change anything in the Key File. It will cause the registration process to fail.

You need to be logged as an administrator on the PC.

B. Concurrent license

ET LicenseManager should be installed on a PC on your network

1. Contact your system administrator and get the following information:
   • The Name or IP address of the PC where the ET LicenseManager is installed.
   •  The TCP port on which the ET License Manager communicates.
2. Open ET Surface Main Dialog and click ==> Connect To License Server.
3. In the dialog fill
   • License Server - fill the network name or the IP Address of the license server.
   • TCP Port - fill the port number.
4. Click on the Test License Server button.
5. If a connection to the license server is established, click OK to save the settings. You are ready to work.
6. If the test fails - contact your system administrator.